Get Your Skip Bins Clean and in Perfect Working Order
If you use a skip bin on a regular basis, it’s important to keep it in top condition. A dirty or full skip bin won’t be suitable for all your needs or will attract unwanted attention from the authorities. Here are some steps you can take to maintain an effective and working skip bin:
Drop the heavy load.
There are two ways to remove your heavy items and this will depend on whether you have a skip bin or a dumpster. If using a skip bin, simply open the lid and lift out the large items individually. If using a dumpster, it can be helpful to first use a shovel to remove the large items before opening the lid and adding smaller items. Rubbish removal Adelaide can be dispose any rubbish in your house from time to time.
If you do have access to tools such as forklifts or cranes then removing heavy waste is also possible without needing anything more than brute strength!
Hose the skip bin down.
Cleaning your skip bin is not as difficult as you may think. All you need to do is hose it down and let it air dry. Don’t use a pressure washer, because this will damage the bin. Also, make sure the water is turned off when hosing down the skip bin!
Remove small waste particles.
To clean your bin, use a small brush to remove any small waste particles that may be stuck to the inside of the skip bin. Never use a broom as it will scratch the surface of the skip bin, and never vacuum up rubbish with your shop vac as it could damage your equipment. If you have large amounts of small rubble or dirt that needs removing from around the edges of your skip bin, then pressure washing is recommended.
Scrub with a stiff brush.
The next step is to scrub the bin with a stiff brush. This will remove any debris that you can’t see, like dirt or rust. Use mild detergent and hot water as you clean it. After scrubbing, use a hose to rinse off the bin and dry it with a towel.
Rinse and repeat
To ensure the bin is clean and ready for use, you should rinse it and leave it to dry. If you have access to a high-pressure hose, this can be done by spraying the inside of the skips with water until all waste has been removed. The best way to go about this is by starting at one end of the skip bin and working your way along in order from top to bottom. This ensures that there are no areas left untouched and will ensure no leftover waste or dirt remain in any corners or crevices of your skip bin once it has been rinsed out thoroughly.
If you don’t have access to a high-pressure hose, it may be a good idea just to give your skips an initial wipe down on top before beginning with spraying them down with water until all waste has been removed from inside them (this step can sometimes take more time than others). Once that’s done though make sure they are left somewhere where they won’t get wet again until they are needed such as under cover outside away from direct sunlight shining on them throughout any days since then when you need them most again!
Clean it up, mate
- Clean your skip bins regularly
- Keep your skip bin area tidy
- Make sure the skip bins are in good condition and working order
Now, you may be thinking that cleaning a skip bin is not the most exciting thing in the world. You’d be right—it’s not. But it is necessary if you want to make sure that your bins are in tip-top shape for when you need them next time around. And we know what they say: cleanliness is next to godliness. Find out that skip bin that are not workable and replace it.